High flow 3″ catback exhaust to fit the 8N chassis Audi TT’s.
This exhaust is a bolt on fitment for the 225 version. If you have the 180 version then you will need to change the rear bumper to the 225 type for the dual tailpipes to fit.
Just by fitting this exhaust you will gain power but it also leaves scope for future mods, the exhaust can flow to over 400BHP.
This exhaust was designed to have a loud and deep sound, you will also be able to hear the turbo, especially if you have a sports cat or decat fitted.
Made from stainless steel and TIG welded, this exhaust will last many years.
– Increase power
– Loud deep sound
– Stainless Steel
– 3″ Bore
1/VAG exhausts do not clamp over each other. They use a joining sleeve which can be opened up to fit this exhaust to either the 225 or the 180. RTV is supplied to get a seal on this because if that sleeve is 15-20 years old they can be a challenge to open and then reseal. It is recommended to replace this sleeve if you are unsure of the condition.
2/ The stepdown adapter shown is not included and not required. It was not supposed to be in the pictures with this exhaust.
|Dimensions||27 × 71 × 117 cm|
|Country/Region of Manufacture|
|Manufacturer Part Number|
3" / 76.2mm
|Fitting Kit Included?||
|Placement on Vehicle|
|Vehicle Production Years||
1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006