BMW 335i Performance 19 Row Oil Cooler Kit, N54 Engine
This cooler kit is ideal for track cars which need lots of extra cooling, or road going cars that get driven hard.
This kit can be put on any car that is using the N54 engine.
Once most oil gets over 300 degrees F it begins to loose it’s lubricating properties, this causes excessive engine wear and will eventually lead to engine failure. This cooler will help to prevent this problem. This cooler does not feature a thermostat and overcooling oil can also cause problems so it is best practice to fit an oil temp gauge to be sure.
There are 6 fittings supplied but you will only require 4, supplying more than required just gives that extra flexibility when it comes to fitting.
There is 4m of stainless steel braided hose supplied with the kit that can be cut to length, you will need a angle grinder or similar with a cutting disc to cut the hose to the desired length. If you have not fitted the aeroquip type fittings before it is probably a good idea to watch a Youtube video or two before attempting to fit them to the hose.
What to expect in the box
1 x Black 19 Row Mocal Style Cooler
4m of Stainless Braided AN10 Hose
2 x 90 degree Aeroquip Type Fittings
2 x 45 degree Aeroquip Type Fittings
2 x Straight Aeroquip Type Fittings
1 x N54 Engine Oil Takeoff Plate
You will need to decide how best to mount the cooler for your specific application.
|Placement on Vehicle|
Aluminium, Stainless Steel
|Oil Cooler Type||
19 Row AN-10
|Manufacturer Part Number|
|Vehicle Production Years||
2005, 2006, 2007, 2008, 2009
1 Series E81, 1 Series E87, 3 Series E90, 3 Series E91, 3 Series E92